G1109 90° Peel Fixture
AC1078 & AC1079 Angle Adapters (optional) - Installation Instructions
Mark-10 Corporation
www.mark-10.com
Toll-free: 888-MARK-TEN
Tel: 631-842-9200
Fax: 631-842-9201
32-1232
PAGE 2 OF 2
AC1078
AC1079
1. Install the G1109 fi xture to the ESM303 test stand, as described on Page 1.
2. Install the column to the base of the G1109 with two thumb screws.
3. Tie a loop with the pull cable through the hole in the grip adapter, then fasten the
desired grip to the adapter.
4. Install the G1078 miniature bollard grip to the force gauge, then wrap and secure
the pull cable as described on Page 1.
5. When setting up the sample, adjust the pulley height as needed, and route the
pull cable around the pulley.
COLUMN
PULLEY
THUMB
SCREWS
G1109
1. Install AC1079 to the base plate of the ESM303 test stand using four socket
head screws.
2. Install the intermediate plate onto AC1079 using two fl at head screws.
3. Install G1109 to the adapter plate using four socket head screws.
INTERMEDIATE
PLATE
AC1079 ANGLE
ADAPTER
G1109
GRIP
ADAPTER
G1078
PULL
CABLE
