Marine Power Solutions MP-458, Руководство по эксплуатации

Страница: 5 / 23

5
2.5 Preparation Before Starting
Before starting engine make sure that:
There is no FUEL LEAKAGE
There is no WATER LEAKAGE
There is no OIL LEAKAGE
There is no SMELL OF LP-GAS in the deep cavities of the boat or elsewhere
The OIL LEVELS are correct
The COOLING WATER LEVEL in the expansion tank for the fresh water system is correct.
The proper NAUTICAL CHARTS are on board for the planed voyage
There is enough FUEL on board for the planed voyage
Make sure when filling your fuel tank that there is no open flame on board. Ventilate the boat and
run the engine room fan ?9if fitted) for 4 minutes before starting the engine. Do not overfill fuel
tank.
3. Engine Component Guide
1. EXTENSION TANK
2. OIL FILLER
3. AIR FILTER
4. OIL SUMPPUMP
5. OIL FILTER
6. REV SENSOR 7. OIL PRESSURE SENSOR
8. SOLENOID
9. FUEL FILTER