http://www.marinemagic-online.com
3
Features
1.
Wall mounted and Table top design.
2.
12V, 1A device, low voltage operation, high safety.
3.
2 float switch control has 3 mode to operate.
▪
1
st
mode
1 float switch simple operation
▪
2
nd
mode
2 float switch opeartion, 2
nd
one use as protection
▪
3
rd
mode
2 float switch operation, 2
nd
one to detect the sump water is
empty or not
4.
Magnetic and transparent float switch design. Easy to adjust and visible to bracket
inside.
5.
Could use any 12V 1A DC water pump. Could use High performance DC water pump
and Brushless DC water pump. (See below)
Using Instruction
1.
Put the float switch in the float switch bracket from the top opening.
2.
Connect the float switch to the bottom of the 2 plug. It has marking “A” and “B” on
the back of the housing. (see connecting diagram)
3.
If you are using the BLDC water pump, just plug it in the controller. For DC water
pump, since it has a different plug, you need a connecting cable.
4.
Put the adaptor to the plug and connect to the unit. There is “Power” marking on
the back of housing.
5.
Press the ON/OFF button. The white LED will be on if power connected.
6.
Selecting your design mode, the blue LED indicate the mode you are using.
7.
In mode 3, if the water in the sump is empty, the red LED will be on to alert you.
PARTS# MM-PUMP-01
BLDC motor water pump
1.5 meter lifting, long life
(pump with the unit
PARTS# MM-PUMP-02
DC motor water pump
5 meter lifting, 500 hours life span
Optional for purchase