MD69/24
21
12
GROUNDING AND SHIELDING
Equipment fitted to the Pelorus Pedestal should be grounded via the M6 earth stud located on
the bottom face of the MD96JCB Junction Box. This earth stud provides the electrical contact for
protective earth bonding.
13
SAFETY AND SECURITY
Please observe the following procedures to ensure safety of personnel installing and operating
the equipment:
•
Ensure all power to the unit is disconnected and locked-out during installation,
maintenance and removal procedures
•
Ensure power is disconnected and locked-out in the event of mechanical damage to the
unit, rendering internal parts accessible to personnel
•
Only the electrical power of the specified voltage should be connected to the unit
•
In the event of damage to the window: Care should be taken to prevent injury from any
sharp edges that may be exposed
•
The deck to which the unit is mounted should be designed to provide adequate
mechanical support. This minimises the possibility of damage or injury caused under
mechanical shock conditions
•
Care should be taken to ensure the fixings used to mount the unit to the deck are
correctly fitted and retain their mechanical integrity over time
•
Take care if installing a Marine Data Compass Repeater in the Pelorus Pedestal. The
Repeater contains heavy ballast weights to lower the centre of gravity. If the Repeater
rights itself unexpectedly then this could trap fingers in the gimbal or damage nearby
equipment
