background image

 

 

 

 

 

 

 

 

 

MA100 

Bluetooth Operation 

The MA100 includes built-in Bluetooth technology that allows you to connect this head unit to Bluetooth-enabled devices for 

streaming audio playback. 

About Bluetooth Technology 

Bluetooth wireless technology is a short-range wireless radio protocol. Operating in the 2.4 GHz range, it transmits 
audio and data at speeds up to 2.1 Mbit/s over a range of up to 10 meters.

 

Bluetooth Menu Options 

NOTE: Please note that some Bluetooth menu options are only available while the unit is in Bluetooth Audio mode. 

Press and hold the MODE button (8) to enter the menu adjustment mode. Then repeatedly press the MODE button to access the 

following Bluetooth Menu options: 

 

 

BT ON/OFF: Press the VOL+ (ON) or VOL- (OFF) button to turn the Bluetooth function on or off. 

 

BT Pair: On the BT Pair screen press the 

||/MUTE (9) button to make pairing available for 120 seconds then connect 

using your Bluetooth enabled device 

 

DEVICE: Press the 

||/MUTE button to view a list of previously paired mobile phone devices. Press the VOL+ or VOL- 

buttons (2, 3) to view devices in the list. When viewing a specific device press 

||/MUTE again to enable the following 

LOCK/UNLOCK, DISCONNECT, and DELETE functions and VOL+ or VOL- to cycle through them. 

 

LOCK/UNLOCK: The MA100 can store up to 5 devices for Bluetooth connection. The devices are stored in a FIFO 
(First In First Out) order. To prevent a device from being bumped from the list when more than 5 devices are used, 
you can lock the device. To Lock/Unlock a device, press 

||/MUTE to change between Lock/Unlock.   

 

DISCONNECT: To disconnect a paired device, press the 

||/MUTE button to temporarily remove the Bluetooth 

connection. The connection can be re-established through your phone menu by selecting the MA100 for 
connection. 

 

DELETE: Deleting a device removes it from the pairing list. To delete a device from the list, press the 

||/MUTE 

button. To reconnect with a deleted device it must be paired again. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Device 1 
Device 2 
Device 3 
Device 4 
Device 5 

BT Device 

Press 

||/MUTE 

Device 1 

… 

… 

… 

Device 5 

Lock/Unlock 

Connect/Disconnect 

Delete 

Lock/Unlock 

Connect/Disconnect 

Delete 

Press 

||/MUTE 

 

Use VOL +/- 

to Navigate 

the List 

Press 

||/MUTE 

Press 

||/MUTE 

VOL - / VOL+ 

 

Содержание MA100

















Отзывы: