MARIMEX Star Vac, Инструкция по эксплуатации

Страница: 10 / 16

10
Vacuum cleaner Star Vac
Instruction
BEFORE INSTALLING AND USING THE VACUUM CLEANER, READ AND FOLLOW
THIS MANUAL.
Package contents
Nr. Part name
1 4-piece folding bar
2 Hose 5 m 5/4 - 2 parts including hose coupling
3 Reduction for connection - 2 sizes
4 Suction nozzle - Narrow and wide
5 Vacuum cleaner body with collection bag
Installation
To assemble the vacuum cleaner, refer to figures 1-4
1) Connect the hose to the hose coupling. For better sealing, we recommend using
Teflon tape and hose clip (not included).
2) Dive the assembled vacuum cleaner with the hose into the pool. Allow it to fill
with water until all the air has escaped.
IMPORTANT: The air that remains in the parts of the vacuum cleaner may prevent
proper operation. Ensure thorough bleeding, especially from all the folds of the
hose part of the vacuum cleaner, and release all air pockets.
Turn off the filter device before installing it in the filter circuit.
3) Hose connection
• If you have a skimmer, attach the hose end to the skimmer lid hose (skim vac), (fig. 6)
• If you do not have a skimmer, remove the strainer from the suction nozzle of
the filter circuit inside the pool (Figure 5). Take the reductions contained in
the package and attach the size corresponding to the reduction to the nozzle.
Tighten only by hand (do not use tools).
• Replace the hose end with the reduction applied.
4) Turn the filter unit on and start sucking dirt from the bottom of the pool
EN