height adjustment warnings
clamping pressure adjustment
instrument cleaning
moving the instrument
101120 - Rev. A
Page 9 of 10
To increase clamping pressure turn wheel clockwise.
To decrease clamping pressure turn wheel counter-clockwise.
• Always adjust the height of the instrument with rails, resonators and bars installed.
• Release the levers one end at a time.
• Always keep instrument ends at equal heights.
• Do not release the end levers at the same time.
USE A SOFT COTTON RAG OR TOWEL DAMPENED WITH WATER ONLY.
DO NOT USE FURNITURE POLISH on your instrument!
Most of this type of product contains silicone, which will damage the finish and
contaminate the wood.
THE INSTRUMENT SHOULD ONLY BE LIFTED BY THE END FRAMES.
• Lifting by the rails will cause the rails to come out of their slots.
• When the instrument is moved, pass VERY SLOWLY through
doorways, over doorjambs, electrical cords, and uneven surfaces.
