2.2. Back
Side
Analog Inputs 1-8
Devices are connected to the analog inputs using balanced
cables, which are equipped at the ADCON side with ¼’’ TRS
plugs. They can also be connected using non-balanced cables
with a ¼’’ TS plug.
Level Switch for Analog Inputs
Using this switch you can switch the input level of the analog
inputs between –10 dBV and +4 dBu. For information about
which level is used by the device, please refer to the
appropriate manual.
ADAT Input
A device is connected to the ADAT input using an optical
cable with TOSLINK plug.
When using optical cables, please ensure that they are
free of breaks and damage, because this may lead to
failures! Please do not use any optical cables longer than
2 meters!
Analog Outputs 1-8
Devices are connected to the analog outputs using balanced
cables, which are equipped at the ADCON side with ¼’’ TRS
plug. They can also be connected using non-balanced cables
with a ¼’’ TS plug.
The ADCON automatically recognizes whether a balanced
or non-balanced cable is used and adjusts the level
accordingly!
5
