-9-
-10-
Manual Cycle
To make a thicker drink:
a. Hold the “Blend Only/Shave Only” Toggle Switch
in the Shave Only position to add more ice to the
Blending Jar.
b. To stop adding ice, release the toggle switch.
c. To mix the newly added ice into the drink, hold
the Blend Only/Shave Only Toggle Switch
in the blend only position until the desired
consistency
is achieved. To stop the blending release the
toggle switch.
d. Use less drink mixer than in recipe.
(example: for 3 drinks, use 9 oz. liquid content)
To make a thinner drink:
a. Hold the Blend Only/Shave Only Toggle Switch in the
Blend Only position until the desired consistency is
achieved.
b. To stop blending release the toggle switch.
c. Add more drink mixer than in recipe
(example: for 3 drinks, use 10.5 oz. of total mix)
Automated Shave ’n Blend™ Cycle
14.
Start the automatic shave and blend cycle
by pushing up on the Shave ’n Blend™ Toggle Switch.
15.
The unit will shave ice for the appropriate time. The
blender will start automatically. The unit will stop at
the completion of the cycle.
NOTE: DURING THE SHAVE AND BLEND
CYCLE THE PROGRESS INDICATOR
LIGHTS WILL ILLUMINATE IN A
SEQUENCE FROM LEFT TO RIGHT TO
INDICATE THE CYCLE PROGRESS. DO NOT REMOVE
THE BLENDING JAR WHILE THE PROGRESS
INDICATOR LIGHTS ARE ILLUMINATED.
16.
The Power Indicator Light will blink to indicate the unit
is ready to make more drinks. Avoid any contact with
blades or moveable parts.
17.
To serve:
a. Lift and remove the Blending Jar.
b. Remove Blending Jar Lid.
c. Pour and enjoy.
NOTE: TO REMOVE EXCESS ICE FROM THE
ICE RESERVOIR HOLD THE SHAVE
ONLY TOGGLE SWITCH IN THE SHAVE
ONLY POSITION UNTIL THE ICE
RESERVOIR IS EMPTY. WARNING:
DO NOT PLACE FINGERS IN THE ICE
HOPPER THE SHAVING BLADE IS
SHARP AND COULD CAUSE INJURY.
18.
Turn off the unit.
19.
Periodically check the Ice Melt reservoir
and empty as needed.
Shave ’n Blend™
Toggle Switch
Blend Only/
Shave Only
Toggle Switch
DM2000-033_12EFM1.indd 9-10
7/19/12 9:41 AM
