-11-
tRoubleShooting
if the power indicator light does not light:
check that the unit is plugged into a working power outlet.
if liquid leaks from the base of the blending jar:
remove it from the unit and check that the blending blade sealing ring
is properly installed and that the blending Jar base is tightened.
if water leaks from the unit:
empty the ice Melt reservoir and make sure reservoir is in place.
if the blending jar overflows during the Shave ’n blend™ cycle:
follow the drink recipes included in “Making frozen drinks” section and make
sure to not exceed the specified total volume.
if the blending jar will not sit on the blending base:
remove it from the unit and check for ice on the blending base.
Warning: unplug the unit before removing ice from the blending base.
if the shaver does not shave sufficient ice for the liquid in the blending jar:
check that the number of drinks rotary switch setting corresponds to the amount
of liquid in the blending Jar.
DoS anD Don’tS
Do not
place fingers into the
Blending Jar
or
Ice hopper.
the blades in this unit
are sharp and could cause injury.
Do not place blending Jar onto blending base while motor is running. the
spinning blending base could damage the blending Jar.
Do not twist blending Jar when removing. simply lift and remove. twisting the
blending Jar could loosen the blending Jar base causing it to leak.
Do not put hot liquid into the blending Jar. hot liquids could be ejected during the
blending process causing injury.
Do not place ice, frozen foods or very cold liquids into a blending Jar which has
come directly from a hot dishwasher. the sudden change in temperature could
cause the blending Jar to crack.
Do not place very hot liquids or foods into a blending Jar that has come directly
from the freezer. the sudden change in temperature could cause the blending Jar
to crack.
Do follow the cleaning and Maintenance instructions prior to your first use.
Do unplug the unit when not in use.
Содержание DM1500 Series
Страница 15: ...NOTES...
