Maretron DSM570, Руководство пользователя

Страница: 96 / 283

DSM570
User’s Manual
Page 80 Revision 1.8.3
Figure 66
– Favorite Settings Transfer Completion Screen
6.8.6 Copy DST100 calibrations from local display
DST100 calibration data is not stored in the DST100 device. Rather each
DSM150/DSM250/DSM410/DSM570 needs to apply its own set of calibration parameters to the raw
data received. This operation allows one DSM570 to copy its calibration table to a second
DSM150/DSM250/DSM410/DSM570.
Figure 67
– DSM150/DSM250/DSM410/DSM570 Copy DST100 calibrations from local display
6.8.7 Copy all settings from local display
This is the single operation that makes it easy to have multiple DSM150/DSM250/DSM410/DSM570
displays on a boat. Set one DSM150/DSM250/DSM410/DSM570 up so that all its settings are
correct, and quickly transfer all the alarms, device settings and display setting to another
DSM150/DSM250/DSM410/DSM570. Then go in and update the following information to customize
the new device.
•
Display Settings
→
Advanced Configuration
→
Installation Descriptions
•
Display Settings
→
Label