Maretron DSM570, Руководство пользователя

Страница: 82 / 283

DSM570
User’s Manual
Page 66 Revision 1.8.3
installed, for later reference. Tools such as Maretron N2KAnalyzer allow you to view these values
later. See section 3.3.4 for details on how to enter a textual value.
6.5.1.3 NMEA2000 PGN Enable/Disable
The CLM100 Current Loop Monitor can transmit the NMEA2000 PGNs #65286, 127751, 130313,
130314, 130816, and 130840 which can be turned on or turned off by the DSM570 display. Only the
PGN's which correspond to the configuration of the channels will be shown in this list. Pressing the
Enter
key with “NMEA2000 PGN Enable/Disable…” menu item selected causes the DSM570 to
display the following screen (Figure 49).
Figure 49
– CLM100 NMEA 2000
®
PGN Enable/Disable Screen
You can enable or disable the transmission of these messages or set the frequency of transmission of
the message by pressing the Enter key (
) on the message to be configured. Options are:
•
Disable
– The message will not be transmitted
•
Default
– The message will be transmitted at its default NMEA2000 rate.
•
0.1s...25.0s
– The message will be transmitted at the period specified.
Select the required option using the
Scroll Up and Scroll Down keys followed by the Enter key.
6.5.1.4 Restore Factory Defaults
This option restores all settings on the device to their factory default state.
6.5.2 Advanced Configuration
Advanced Configuration changes some complex parameters within the device and should only be
performed by an advanced user. Typically, advanced configuration is only done at installation and
should not need to be done while at sea.