Maretron DSM410, Руководство пользователя

Страница: 280 / 289

DSM410
User’s Manual
Page 264 Revision 1.7.2
10 Troubleshooting
If you notice unexpected operation of the Maretron DSM410, follow the troubleshooting
procedures in this section to remedy simple problems.
Symptom Troubleshooting Procedure
No activity on the display Check the connection to the NMEA 2000
®
and
connector and tighten if necessary
Ensure that power is supplied to the connected
NMEA 2000
®
cable
Expected
data appears as a dash “-“
instead of a value
Use the N2KAnalyzer tool to verify whether the
device providing the data to the network is in
transmitting a valid data value.
Data fluctuates between two different
values Two devices on the network are transmitting the
same data. Check the Instance Numbers on all
devices transmitting that data.
If these steps do not solve your problem, please contact Maretron Technical Support (refer to Section
12 for contact information).
Warning: There are no user-serviceable components inside the Maretron DSM410. Opening the
DSM410 will expose the sensitive electronic components to adverse environmental conditions that may
render the unit inoperative. Please do not open the DSM410, as this will automatically void the warranty.
If service is required, please return the unit to an authorized Maretron service location.