Maretron A3802-1, Руководство пользователя

Страница: 15 / 18

___________________________________________________________
CKM12 User’s Manual Rev.1.1 12
Environmental Operation
Parameter Value
Operating Temperature -40°C to 85°C
Ingress Protection IP69 (Front)
IP68 (Rear)
Storage Temperature -40°C to 85°C
Ignition Protection Ignition Protected
Environmental Testing
Parameter Standard Conditions
High Temperature Soak EN 60068-2-2:2007
96hrs. @ 85°C
Low Temperature Soak EN 60068-2-1:2007
96 hrs. @ -40°C
Temperature Cycling (Operating) IEC 60068-2-14:2009
-40°C - 85°C (2 cycles of 8 hrs.)
Temperature Shock (Storage) IEC 60068-2-14:2009
T
min
= -40°C, T
max
= 85°C
Simulated Solar Radiation EN 60068-2-5:2010
(Procedure B)
10 days @ 40°C
Ignition Protection ISO 8846
Humidity (Soak) EN 60068-2-78:2002
RH = 93% +/-3%, Exposure 10 days
Humidity - Cyclic EN 60068-2-30:2005 RH (> 90%), 6 cycles of 24hrs
Dust Ingress IEC 60529:2001 Method EN60529 Section 13 Result
IP6X
Water Ingress
DIN 40050-9:1993
IEC 60529:2001
Method as DIN 40050-9 Result IP69K
Mechanical Shock - Drop Test EN 60068-2-31:1993 500mm free-fall, all faces of 3 axes
Mechanical - Shock
60068-2-27:2009
500m/s
2
, pulse duration 11ms
Mechanical - Bump 60068-2-29:1993 400m/s 2 6ms shock pulses, 3 axes
Vibration (General) 60068-2-6: 1996 Sine shaped sweep 5 Hz to 500 Hz
Amplitude, 5g, (20 Cycles in each plane)
Vibration (Random) EN 60068-2-64:1995
(Method 1)
Random excitation at 10, 150, 220, and
350 Hz breakpoint frequencies, 5 hours
in each axis
Vibration (Resonant Search) 60068-2-6: 1996 frequency range 10 Hz
– 2 kHz @ 5G (5
Minutes at each resonant point)
Chemical Resistance ISO 16750-5 (Method 2) Test method = B
Salt Spray(Corrosion Resistance) EN 60068-2-52: 1996 Chamber Temperature = 35°C
(level 4 severity)
Component Test - Electrical
Transients Immunity ISO 11452-2:2004 100V/m, 20MHz to
2GHz
Component Test - Electrical
Transients Emissions
ISO 13766:2006 Section 5
Annex D and Annex E
Distance of 1 m in the horizontal and
vertical polarization, 30 MHz to 1 GHz
Component Test - Electrical
Transients Conducted
ISO 7637-2:2004
Method as per ISO 7637-2-Annex
A2
Electrostatic Discharge (ESD)
ISO 10605
+/- 8 kV (Direct), +/- 15 kV (Air)