MARENIUS ELEKTRONIKUTVECKLING AB |
www.marenius.se
|
www.marenius.com
|
www.audiodesign.pro
4/4/2014 MM-4240 User Manual v.2.00
22
12. Playback tracks
The MM-4240 has an internal playback feature allowing the user to play recorded files. The
MM-4240 output two selectable tracks on all output busses. To change between tracks use the
up and down key of the menu navigation key. If the “PLAY ATT” is enabled the user may use
the master fader as a volume control. The screen below shows the MM-4240 screen when
playing files from the SD card.
1.
File sample rate
The sample rate of the recorded file.
2.
File bit depth
The resolution of the recorded file.
3.
Number of tracks in the files
Display the number of tracks in the polyphonic BWF file.
4.
SD Card usage
Shows information about the SD card usage.
5.
External power
The power symbol is lit when an external power source is attached to the unit.
6.
Battery level
Displays current internal battery level. The symbol is filled with green or red depending on
the current level. If the symbol is flashing, replace the batteries as soon as possible. The
mixer will only run for about 10 minutes when the battery is flashing.
Note: If the symbol
shall display the correct battery level, the battery chemistry must be correctly selected
