Mareli Systems PS 8, Руководство по сборке и эксплуатации

Страница: 10 / 16

10
Mareli Systems
tA
= Room Temperature [°C];
tF
= Exhaust Temperature [°C];
tr
= Remote Room temperature [°C];
UF
= Speed Combustion Fan [RPM];
P1 CLICK
P1 CLICK (3 sec)
It is possible to activate the
ignition process
with long press on the
P1
button;
It is possible to activate the
extinction process
with long press on the
P1
button;
It is possible to clear the
Block
with long press on the
P1
button.
Click on P2 button: the D2 display blinks. With other click of the
same button the power is changed. Ex.: 1–2–3–4–5–A (A=Automatic
combustion). After 5 seconds the new value is saved and the display shows
as normal.
Combustion Power Setting
P2 CLICK
USER MENU 1
Thermostat Setting
P4 CLICK
P3 CLICK
P2 CLICK (3sec)
Manual Pellet Loading
Press the
P3
or
P4
key: the
D3
display blinks. With sequential clicks on the
P3 / P4
button, it is possible to increase or decrease the set temperature of
the thermostat. After 5 seconds the new value is saved and the display shows
as normal.
The long pressure of button
P2
activates the Pellet Manual Loading with
activation of Auger engine in continuous way. The bottom display shows the
word
LoAd
, the up display shows the elapsed loading time. To stop the loading
push any button. The loading stops automatically after 300 seconds.
Description Code
Sond
Hi
Clean
Port
Ignition
block
Cleaning on
Link Error
Anomaly of the probes checking, during Check Up phase.
Room temperature greater than 50 °C.
This message notifies that the planned hours of functioning (parameter T67 ) are reached.
Door Open.
The message appears if the system is turned off during Ignition (after Preload) not manually:
the system will stop only when it goes in Run Mode.
Periodical Cleaning in progress.
No communication between motherboard and keyboard
MESSAGES