MARELD FLASH 1000 RE, Инструкция по эксплуатации

Страница: 6 / 24

6
ENGLISH
IMPORTANT Read these instructions fully before using the Floodlight. Retain
these instructions for future reference.
Technical data
Safety instructions
• Do not use the lamp in the immediate vicinity of inflammable materials or gases.
• Only use accessories included with the product.
• Keep the lamp out of the reach of unauthorised persons, especially children.
• Do not aim the light directly into your own eyes or those of anyone else or those of
an animal.
• Always check the mains cable before using the lamp.
• If the power cord shows signs of damage it must be replaced by a qualified person
in order to avoid a hazard.
Cleaning
• Disconnect the power cord and allow the LED floodlight time to cool down
sufficiently prior to cleaning. Clean using a dry or slightly moist, clean, lint-free cloth
and a mild detergent if required. Do not use cleaning agents that contain abrasives or
solvents.
Maintenance
• Check the plug, power cord and LED floodlight housing for signs of damage before
each use. If the lens is damaged it must be replaced immediately.
• Clean any dirt from the housing or the lens immediately,
since this could cause
overheating.
ENGLISH
1. Model: JF8110-10 W
2. Body: Alu PC + Rubber
3. LED: 10 W COB
4. Lumen: 1000
5. LED Colour temperature: Approx.
6500 K
6. With Charger: 5 V 2 A
7. With 1.0 mitre Mirco USB cable
8. With USB car charger: 5 V 1 A
9. Battery: 3.7 V 5000 mAh Li-ion
Charging time: Approx. 3 hours
Operation time:
Approx. 3,5 h lighting for switch to
100 %
Approx. 7 h lighting for switch to 50 %
10. IP65; IK08
1. Model: JF8110-20 W
2. Body: Alu PC + Rubber
3. LED: 20 W COB
4. Lumen: 1800
5. LED Colour temperature: Approx.
6500 K
6. With Charger: 12 V 1 A, with 1.8 metre
cable
7. With car charger: 12 V 1 A
8. Battery: 7,4 V 5000 mAh Li-ion
Charging time: Approx. 4 hours
Operation time:
Approx. 3,5 h lighting for switch to
100 %
Approx. 7 h lighting for switch to 50 %
9. IP65; IK08