7
FIRST SETUP:
The heads are standard delivered with the motor connection at the Right-
hand side.
We can easily swop this to the Left Side by removing the clutch parts and
mount them at the other side of the machine (swop the side weights at the
same time). Make sure you mount them in exact the same position as
before (do not mirror them).
Next, a parts kit is needed to mount the head to your triplex greensmower.
Maredo has several kits available. Each kit comes with its own mounting
instructions and parts-list.
MAINTENANCE
CHECK BOLTS
AND NUTS REGULARLY
DON’T
USE HIGH PRESSURIZED WATER TO CLEAN
ADJUSTMENTS/ IMPORTANT NOTES
The working depth can be changed, by moving
The front roller up or down. Loosen the 2 x 2
bolts, adjust both sides evenly and tighten again.
DO NOT OVERTIGHTEN THESE NUTS
The rear scraper can be removed or simply be
tied up. Use a ty-rap or rope and pull the
scraper up.
If the core collector is too aggressive, put an
elastic band in the centre, which takes some
weight off.
In case the core collector hit the rear wheel,
move the complete head forward, or remove the scraper completely.
