Step 3
Insert the seat (53) to the slide rail (45).
Insert two cushion rubbers (36) to the slide rail (45), slightly fasten with two allen bolts (34).
Fasten two foot mats (55) on the rear support tube (54).
Attach the rear support tube (54) to the slide rail (45), fasten with one allen bolt (19), three
flat washers (43) and two allen bolts (42).
Then insert two end caps for side rail (40L/R) to the end of slide rail (45).
1
53
54
40R
40L
34
36
36
34
42
42
43
43
19
45
55
55
M8*40mm
42
2X
φ
8*
φ
17mm
43
3X
36
2X
40
2X
L/R
M8*20mm
34
2X
M8*16mm
19
1X
6mm
Step 4
Turn over the main frame and make the rear support tube to the floor.
Take off four self-tapping screws (10) from the end caps for front stabilizer tube (8L/R)
which are pre-assembled on the end caps, then attach the end caps to the front support
tube (9) by four self-tapping screws (10).
Attach the front support tube (9) to the main frame (1), fasten with four allen bolts (19).
8L
8R
10
10
10
10
9
1
19
M8*16mm
19
4X
6mm
www.puretecfitness.com
7