Marcy ER3000D, Инструкция по эксплуатации

Страница: 6 / 17

6
ASSEMBLY INSTRUCTION
STEP 1
Attach the front stabilizer (2) to the main frame (1), tighten with two sets of carriage bolts
(15), curve washer (17) and domed nut (16). Now repeat this procedure for the rear
stabilizer (3), tighten with two sets of carriage bolts (15), curve washer (17) and domed nut
(16).
STEP 2
(a) Take the front post (4) and connect the middle computer wire (37) with lower computer
wire (40). Ensure the Tension Control Knob is set to number 8. Connect the upper
tension cable (38) to the lower tension cable (39). Please see page 7 for a detailed
description of the assembly. Insert the front post (4) into the main frame (1) and
tighten with 4 sets of allen bolt (18) and curve washer (17).
(b) Slide the computer (6) onto the computer holder of the front post (4), tighten with 2
screws. Plug the computer wire (37) into the rear of the computer marked “sensor input”.