background image

- 5 -

from hole to hole. Drop the camera down each hole in search for the best spot or until you locate 

fish. Keep your eye on the directional and depth indicators to pinpoint the fish’s hideout. Once 

you’ve located the spot, drill a hole 3- 4 feet away from the hole you’re actually going to fish in. Set 

the Quest HD L on the ice and lower the camera down the second hole. To assist in keeping the 

camera at the desired depth and direction, it is recommended that an Automatic Camera Panner 

be used. Once you send a lure or bait down and locate it with the Quest HD L, you are ready to 

fish. The depth, direction and temp indicators on the Quest HD L can be changed at any time by 

pressing the OSD/Display button. The Quest HD L also includes a down viewing fin that snaps into 

the back of the Manta camera. Once the fin is attached, the camera cable can be inserted through 

the cutout at the rear of the fin and locked into place. It is recommended that you leave about six 

inches of excess cable, forming a loop, before locking the cable into place. The camera can now 

be lowered into the hole to view what is directly below you. This can be very helpful while fishing 

in shallow water.

OPEN WATER APPLICATION

To locate fish, look for treasure or find that perfect spot, simply turn the camera power ON and 

drop the Manta camera into the water. If you are drifting with the wind or using a trolling motor with 

the Quest HD L, attach the supplied trolling fin to the rear of the Manta Camera for added stability. 

The internal weight is enough to keep the camera down while the fin assists in keeping the Manta 

Camera tracking straight through the water. The direction, temp and depth indicator combined with 

the solar intelligent H2D display makes this the ultimate search tool. Learn in minutes what would 

normally take a lifetime to reveal through traditional sonar. Moving along at speeds of 1 mph or 

less will give the best viewing opportunities. It is a good idea to have a GPS and/or a marker buoy 

at hand to quickly mark any hotspots for future reference. This is a great way to learn new ice 

fishing hotspots. Imagine finding a rock pile that no one else on your lake knows about! Always 

use extra caution when viewing around underwater obstructions like boulders, cribs, or wrecks. If 

the camera becomes hung up, back up from the direction you were traveling from and slowly try 

to back the camera out of the snag. DO NOT pull directly upward with force unless all other 

avenues have been pursued.

If you spend a lot of time using your viewing system from your boat, it is inevitable that you will 

encounter some weather. While your Quest HD L system is designed to be used in a variety of 

conditions in the outdoors, it is recommended that anytime you experience precipitation that is 

more than a light rain, you should immediately turn off and stow your entire viewing system. At no 

time should the monitor be in direct contact with large amounts of water. Should your viewing 

system become wet, it is unlikely that any harm will come to it, but make sure you get the entire 

system completely dried out as soon as possible.

Installing and Using the Visor

Your Quest HD L includes a visor that was custom designed to fit snugly around the monitor. This 

visor will help to shroud the monitor and improve your viewing during sunny conditions. The visor 

is easily attached or removed by using the hook and loop fasteners. It is strongly advised that you 

install the hook side of the hook and loop fastener to the monitor while still at home.

LITHIUM BATTERY CHARGING

Your MarCum Quest HD L comes with a 3-stage battery charger. This style of charger has proven 

to be the most effective and easiest to use of all charging systems available. Since this is a 3-stage 

charger, there is no danger of overcharging your battery. When properly cared for, a LiFePO4 

battery will last for 2000 charge cycles. Batteries are made to be used, and they need to be used 

to make the most of them. The most important thing you can do is to promptly recharge your 

battery after each use. Not charging your battery immediately after use is the number one thing

Versa Electronics

www.MarCumtech.com

Содержание Quest HD L









Отзывы: