Marco MRCVH095ZD-TE, Инструкции по установке и рекомендации по использованию и обслуживанию

Страница: 7 / 20

EN
5
sheet, which you must keep together
with this manual throughout the pro-
duct's service life.
The electrical connection will be via
an allpole circuit breaker or plug,
whenever accessible, in accordance
with the current and with a minimum
3 mm distance between contacts. This
ensures disconnection in emergencies
and allows stovetop cleaning.
Warning:
Only the official techni- cal
service can handle or repair the
appliance, including replacement
of the power cable.
Ensure that the inlet cable does not
come into contact with the hot plate
housing or the oven housing, if it is
installed in the same unit.
Keep the Guarantee Certifi
cate or the technical data sheet
together with the instructions
manual throughout the product's
service life. These contain impor-
tant technical information.
Use and
Maintenance
User instructions of the
Touch Control
HANDLING ELEMENTS
(fig. 2-3)
1
On/Off touch button.
2
Lock touch button.
3
Increase power touch button.
4
Decrease” power touch button.
5
Timer/clock icon.
6
Decrease time touch button.
7
Increase” time touch button.
8
Timer pilot display.
9
Clock display.
10
Power level display.
11
Lock activated display.
12
Stop function touch button.
13
Double/triple burner selection
button.
14
Hot plate double burner on display.
15
Hot plate triple burner on display.
The touch buttons activate the
controls, and each is linked to a
display. You do not need to exert force
on the touch button, you only need to
touch it with the tip of your fingertip to
activate the function.
Each action is verified by a beep.
SWITCHING THE APPLIANCE ON
1 Press the on touch button (1)
for at least one second. The touch
control will become activated, you
will hear a beep and the displays
will light up. If any surface is hot, the
display will flash H and 0 alternately.
If you do not take any action in the
next 10 seconds the touch control will
switch off automatically.
ACTIVATING THE HOT PLATES
The hot plates will be deactivated, with
their respective power displays (10)
to 0, until a power level is selected. If
all of the hot plates are at 0, you have
10 seconds to activate one of them,
otherwise the touch control will switch
off automatically.
Use the touch buttons and (4/3)
to select a power level. If you press the
touch button (3), the hot plate will
change to 1 and the hot plate burner
display (10) will light up. Keep pressing
it to increase the power level. You can
lower the power level using the touch
button (4).
Quick switch-on at maximum power:
with the hot plate at 0, press the touch
button (4) once. The hot plate will go
straight to 9.
8 9 8
10
10
10
2 1
3
4
3
4
3
4
3 4
3
4
6 5
7
11 12
13
10 14
15 10
8 9 8
10
10
10
2 1
3 4
3
4
3
4
3 4
6 5
7
11 12
13
10
15
14
Fig. 2
Fig. 3