Marco 162 001 1B, Инструкция по эксплуатации

Страница: 3 / 12

PRODUCT DESCRIPTION
Self-priming electric pump for transfer of fresh or salt water with flexible impeller of nitrile
rubber which allows the problem-free transit of small particles.
The electric pump must be connected to a 110VAC/60Hz power. The pump must be
protected by a suitable rated fuse.
The pump has been designed for continuous use.
ELECTRICAL CONNECTIONS
OPERATING CYCLE
AMBIENT CONDITIONS
TECHNICAL DETAILS
APPLICATIONS
There are numerous fields of applications for the pump, however only exclusively with
the allowed liquids mentioned.
- water transfer
- boat bilge water transfer
A
D
E
C
B
F
CODE TYPE FLOW RATE PRESSURE VOLT FUSE WEIGHT P.CS x CART.
162 001 1B UP1/AC 1 110 9,5 gpm 15 psi 5 A 18,7 lb
© S.p.A.
TEMPERATURE: min.-10°C 14°F-max.60°C 140°F RELATIVE HUMIDITY: max. 90 %
WARNING: the above indicated temperature ranges are applicable to all components
of the pump and these limits must be respected in order to avoid any possible
damage or malfunctioning.