User Manual version 2503
LIBRA 120 III (PC620 Intel 815E)
1-3
1.2.
What Covers in this Manual
This handbook contains most information you need to set up
and use the LIBRA IV system.
Only service technicians are
allowed to open the system for service
.
You do not need to
read everything in this handbook to use the system.
Chapter 1
(the current chapter) provides background
information and detail specification on the LIBRA
III.
Chapter 2
identifies the LIBRA system exterior components
and provides instructions to help you to use the
system as soon as possible.
Chapter 3
helps you to recognize the LIBRA system internal
modules. It also provides the installation
procedures including the panel PC, display
module and peripheral modules.
Chapter 4
provides detail information of the jumper settings
and connector signals of the system control
board.
Chapter 5
explains the AWARD BIOS setup.
Chapter 6
introduces the Ethernet, XGA, audio and
touchscreen drivers.
Appendix A
details the 12.1” LCD specifications.
Appendix B
introduces the system’s onboard DIO.
Appendix C
introduces the DiskOnChip
installation.
Appendix D
introduces the Wake-On-LAN feature.
Appendix E
describes the system IO port address
Appendix F
explains the first MB memory map.
Appendix G
provides the specifications for the built-in power
supply.
Appendix H
provides the specifications for the 8-in-1 card reader.
Appendix I
provides the specifications for the thermal printer.
PDF created with pdfFactory trial version
www.pdffactory.com
