16
© 2018 Maka Technologies Group. All Rights Reserved.
Product Guide
Installation Instruction of your KR3 FHD Digital Roadcorder
TM
1. Cleaning of both window (windscreen & Rear Window)
Select a suitable place for the device mounting and
clean the spot with a dry cloth to achieve a good
contact between the glass and the 3M double side
tape
2. Attach two camera on both side of the window
Remove the adhesive film from both front and back
mounting and attach the cameras. Adjust the angle
accordingly make sure the lens is not facing upward.
Note : To decrease the blurriness of the video, make
sure the device is secure tightly so any vibration will
not affect much
4. Connect Rear camera connection cable
Connect supplied one side of the cable to the rear
camera jack socket and the other side to the main
device jack socket.
3. Connect power Cable
Connect the supplied power cable to DC IN socket of
the front camera.
Hard wire cable (ACC/GRN/BATT) will needed to be
connected to the fuse box
5. Ensure that your dash cam is in proper working order
Insert the SD card into the device. Once device is
connected properly, boot up screen can be seen and
enter into the live view. A voice guide will prompt you
recording begin once all is in order.
