35
STEP 5:
You will be presented with the dialog box below, enter the IP Address 192.168.1.253
with a subnet mask of 255.255.255.0, click Ok, Ok, Then Close.
STEP 6:
You should be back at Figure 1. Right click on Local Area Connection and click
disable. Once it is disabled. Right click and enable this connection.
STEP 7:
Now open a web browser and enter 192.168.1.51 into the address bar.
If you are prompted for a username and password enter
Enter Username:
admin
Password:
user
STEP 8:
Using the Regular Interface and go to the System Tab / Network and enter the
appropriate information in the fields provided.
Depending on the information changed on the System Tab / Network, you could lose your
connection to the NetPower Card and may have to reconnect.
ATTENTION!