Installing the Endurance Software
34
Marathon Technologies Corporation
This may take a few minutes, depending on the size of the virtual disk.
When the virtual disk is created, the Device Redirector displays a dialog
showing the name of the file that was created, the SCSI ID of the newly cre-
ated virtual disk, and the drive letter associated with the NTFS-formatted
boot partition. Record this drive letter for later use during the FTvirtual
Server installation.
•
Click
OK
.
The Device Redirector prompts you to prepare the FTvirtual Server disk for
the FTvirtual Server part of the installation. Click
Yes
in response to the
Do
you want to configure the
FTvirtual Server
boot disk now?
prompt.
•
Proceed to step 3 of the next section to configure the FTvirtual
Server boot disk.
Installing Windows on and Configuring the FTvir-
tual Server
Select CoServer Devices for FTvirtual Server Use and Configure
the FTvirtual Server Disk
1.
If the
Device Redirector Connection
dialog box is displayed, click
OK
if
both CoServer names appear.
If both CoServer names do not appear:
•
Launch the Endurance Manager (
Start
Programs
Marathon
Endurance
Manager
).
•
When both CoServers appear bright green in the CoServer View
(
View
CoServer View
)
indicating that they are in a
Degraded
state, enter the name of the missing CoServer in the
Device Redi-
rector Connection
dialog box; and then click
OK
.
2.
The Device Redirector prompts you to prepare the FTvirtual Server disk
for the FTvirtual Server part of the installation. Click
Yes
in response to
the
Do you want to configure the FTvirtual Server boot disk now?
prompt.
