USING THE ALARM AND SNOOZE FUNCTION
Slide the
[ ALARM ON/OFF ]
switch to the "
ON
" position to turn on
the alarm function with the alarm icon “AL” on.
If the alarm is turned on, the alarm will beep at the set alarm time.
Alarm beeping can be stopped by:
1. Auto-stop after one minute of no operation (and re-alarm for the
next day.)
2. Press the
[ SNOOZE ]
key to stop the current alarm and enter
snooze mode. Alarm icon “AL” will be flashing continuously while
in snooze mode. The alarm will sound again in 5 minutes.
Snooze can be operated continuously for up to 24 hours.
3. Slide the
[ ALARM ON/OFF ]
switch to the "
OFF
" position to turn
off the alarm function.
USING THE DIMMER
Slide the
[ DIMMER]
switch to adust the LED brightness.
1. Slide the
[ DIMMER]
switch to the "
HIGH
" position for maximum
brightness.
2. Slide the
[ DIMMER]
switch to the "
LOW
" position for minimum
brightness.
USB PORTS
1. Use the two USB ports on the front of the clock to charge your
low voltage apparatus within 1.1 A max.
2. Use a single USB port at the front to charge your low voltage
apparatus within 2.1 A max.
Note:
This USB charger fits various kinds of apparatus, including mobile
phones, tablets, notebooks, mp3/mp4/mp5 players, etc.
When using one USB port, the charge time for your device will be faster.
When using both USB ports at the same time, the charge time for your
device will increase.
SPECIFICATIONS
Operating voltage: 1) AC adaptor: 5V/2.1A
2) Battery: AAA x 3 for backup
Operating temperature range: -5°C~ 50°C / 23ºF~ 122ºF
Designed for indoor use only.
2
MANUAL
ENGLISH
Designed in Canada / Conçu au Canada
Made in China / Fabriqué en Chine
IM-CL030055_V2
C8392B_CL030055 Marathon A5_06.16.2016.indd 2
2016-06-16 9:09 AM
