Marantz UD9004/N1B, Руководство по обслуживанию

Страница: 55 / 190

53
UD9004
K4D261638K-LC40 Pin Function
*1 : The timing reference point for the differential clocking is the cross point of CK and CK.
For any applications using the single ended clocking, apply V
REF
to CK pin.
Symbol Type Function
CK, CK*1 Input
The differential system clock Input.
All of the inputs are sampled on the rising edge of the clock except
DQ
’
s and DM
’
s that are sampled on both edges of the DQS.
CKE Input
Activates the CK signal when high and deactivates the CK signal
when low. By deactivating the clock, CKE low indicates the Power
down mode or Self refresh mode.
CS Input
CS enables the command decoder when low and disabled the com-
mand decoder when high. When the command decoder is disabled,
new commands are ignored but previous operations continue.
RAS Input
Latches row addresses on the positive going edge of the CK with
RAS low. Enables row access & precharge.
CAS Input
Latches column addresses on the positive going edge of the CK with
CAS low. Enables column access.
WE Input
Enables write operation and row precharge.
Latches data in starting from CAS, WE active.
LDQS,UDQS Input/Output
Data input and output are synchronized with both edge of DQS.
For the x16, LDQS corresponds to the data on DQ0-DQ7 ; UDQS
corresponds to the data on DQ8-DQ15.
LDM,UDM Input
Data in Mask. Data In is masked by DM Latency=0 when DM is
high in burst write. For the x16, LDM corresponds to the data on
DQ0-DQ7 ; UDM correspons to the data on DQ8-DQ15.
DQ
0
~ DQ
15
Input/Output Data inputs/Outputs are multiplexed on the same pins.
BA
0
, BA
1
Input Selects which bank is to be active.
A
0
~ A
11
Input
Row/Column addresses are multiplexed on the same pins.
Row addresses : RA
0
~ RA
11
, Column addresses : CA
0
~ CA
8
.
V
DD
/V
SS
Power Supply Power and ground for the input buffers and core logic.
V
DDQ
/V
SSQ
Power Supply
Isolated power supply and ground for the output buffers to provide
improved noise immunity.
V
REF
Power Supply Reference voltage for inputs, used for SSTL interface.
NC/RFU No connection/
Reserved for future use
This pin is recommended to be left "No connection" on the device