4
BASIC
CONNECTIONS
BASIC
OPERA
TION
ADV
ANCED
CONNECTION
ADV
ANCED
OPERA
TION
TROUBLESHOOTING
OTHERS
NAMES AND
FUNCTIONS
NAMES AND
FUNCTIONS
ENGLISH
r
DIMMER
button
When this button is pressed once display is dimmed.
When this button is pressed twice, the display is
turned off and the “DISP” indicator lights up.
Press this button again to turn on the display again.
t
INFRARED receiving sensor
window
This window receives infrared signals from the
remote control.
y
CLEAR
button
Press this button to cancel the tuner preset station or
preset scan tuning. (See page 13)
u
MUTE
button
Press this button to mute the output to the speakers.
Press it again to return to the previous volume level.
i
VOLUME control knob
Adjusts the overall sound level. Turning the control
clockwise increases the sound level.
q
POWER switch and STANDBY
indicator
Press the button to turn the power ON, and press
again to turn it OFF. If the
POWER
switch is in the
ON position, the power of this unit can be turned
ON/OFF by pressing the
POWER
button on the
remote controller.
When this unit is in the standby mode with the
POWER
switch set to the ON position, tuning the
INPUT SELECTOR
knob also allows to turn the
power on.
The
STANDBY
indicator lights up when this unit
is the standby mode (power OFF) by the remote
controller.
w
INPUT SELECTOR knob
This knob is used to select the input sources. (See
page 10)
e
SOURCE DIRECT button
When this button is pressed, the audio signal will
bypass the tone control circuit to provide the pure
sound quality.
In order not to bypass the tone control circuit, press
SOURCE DIRECT button again.
o
MEMORY
button
Press this button to enter the tuner preset memory
numbers or station names. (See page 13)
!0
T-MODE
button
Press this button to select the auto stereo mode or
mono mode when the FM band is selected.
!1
TUNING/PRESET
34
(UP/DOWN)
button
This button used for tuning in the desired broadcasting
stations or to preset in the desired broadcasting
stations.
!2
BAND
button
Press this button to switch between FM and AM in
the TUNER mode.
!3
F (Frequency)/P (Preset) button
During reception of AM or FM, you can change
the function of the UP/DOWN buttons for scanning
frequencies or selecting preset stations by pressing
this button.
!4
PHONES jack for stereo
headphones
Conventional dynamic headphones can be plugged
in here.
Note:
When using headphones, the speaker A and/or B are
switched automatically to OFF and the sound from
the speakers is muted. The speaker A and/or B return
to the previous setting as soon as the plug is removed
from the jack.
DISP
AUTO
TUNED
ST
SLEEP
DIRECT
q w
e r
y
o
u
i
!0
!2 !1
!3
!4
t
NAMES AND FUNCTIONS
FRONT PANEL
