Marantz SR-3000, Руководство по обслуживанию, Страница: 15 / 77

To start service test
program hold
Bass & Treble depressed
while switching
the mains on
Display shows the
following message
"S-7xx-Vzz"
S stands for Service Testprogram
V stands for Software Version
zz version number counted from 01 upwards
MENU
Button pressed?
Display shows"--"
any key pressed?
Display shows
corresponding key number
( see table 1)
MENU
Button pressed?
KEY
TEST
Y
N
Y
N
Y
N
Key
Surr. on/off
Surr. Mode
Hall
Tuner
*Radio Text
Number
2
3
4
5
6
Key
Sens
*News T/A
Prev.Exit
SetupMenu
Next
Enter/OK
Key
Loudness
Bass
Treble
#Front AV
Number
7
8
9
10
11
12
Number
13
14
15
16
Key Test
Table 1
TUNER
Button pressed?
Display shows Tuner version
"ccc"
Service frequencies are
copied to the RAM (see table2)
Tuner works normally except:
Local button
Disconnect
Mains cord
Y
N
Y
TUNER
TEST
Service Mode left
This table is valid for all types of tuners.
Custormer presets will not changed after this Tuner test.
If a station is tuned then the display flag "OK" will be ON otherwise it will be OFF.
If the tuned frequency is carrying RDS information, the display flag "RDS" will be ON.
Oversea version: the tuning grid can be switched between 9kHz and 10kHz by pressing
the key "TUNER" for longer then 2 seconds. "Grid 9" or "Grid10" will be shown accordingly.
Grid 9kHz is in FM 50kHz , Grid 10kHz is in FM 100kHz
Europe version: the LW can be switched On and Off by pressing the key "TUNER" for longer
than 2 seconds. LW OFF or LW ON will be shown accordingly.
Display info
Version
1
2
3
4
5
6
7
8
9
10
11
Europe
"EUR"
/N
87.5MHz
108MHz
531kHz
1602kHz
558kHz
1494kHz
153kHz
279kHz
198kHz
98MHz
----
USA
"USA"
/U
87.5MHz
108MHz
530kHz
1700kHz
560kHz
1500kHz
98MHz
----
----
----
----
Oversea
"OSE"
/K
87.5MHz
108MHz
531kHz
1602kHz
558kHz
1494kHz
----
----
----
----
98MHz
Table 2
Tuner Test
Y
NEWS/DISPLAYT
Button pressed?
Display shows Fig.1
and switch all LEDs on
except Stby Led
Y
N
Y
DISPLAY
TEST
Y
Display shows Fig. 2
and switch all LEDs off
NEWS/DISPLAY
Button pressed?
NEWS/DISPLAY
Button pressed?
N
N
TEST
EEPROM
FORMAT
(RESET)
Activated with ACTION
OK Button
Load default data.
Display shows"NEW" for 1
second.
Caution!
All presets from the
customer will be Lost
Various
other Tests
Default Data
Source =Tuner---Mode=stereo---Volume=10
SubwooferVol=0---Left Volume=0---Center Volume=0
Righ Volume=0---RearL Volume=0---RearR Volume=0
Bass=0---Treble=0---Loudness=Off---Smart Sound=Personal
Center Present=Yes---Rear Present=Yes
Center Size=Small---Rear Size=Small
Front Dist = 4 meter---Rear Dist = 2 meter
For /K: AM grid is 9kHz
FM grid is 50kHz
Preset
N
TUNER
Button pressed?
N
Figure 2
Figure 1
*Button Radio Text chang in Name/Frequency in /K, /U version
Button News T/A chang in Display in /K version
LOUDNESS
NEWS
SENS CINEMA LINK ON
RDS
HALL
LOUDNESS SMART SOUND MENU OK
EON
TA
NEWS
PRESET SENS CINEMA LINK ON
RDS
HILO HALL
5-1 5-1
SERVICE TEST PROGRAM SR3000