Marantz SC-7S1, Руководство пользователя

Страница: 17 / 65

13
ENGLISH
Rear panel
PUSH
PUSH
ID NO. ID NO.
REMOTE
CONTROL
PRE OUT INPUT
BALANCED
REC
OUT
TAPE
1 LINE 2 SACD/CD
BALANCED
A
B I -
A M P
2 1
UNBALANCED
IN
OUT
MODE
BI-AMP STEREO
1
6
5
4
3
2
AC IN
BALANCED
CONNECTION
1 COLD 2 COLD(-) 3 HOT(
+
)
C H
B
C H
PUSH
PUSH
z b v c n , . m x
5. Name and funtion
z
Input Balanced terminal
The terminal to connect with balanced output terminal of
SACD, CD Players.
In case of Bi-Amp mode, Input terminal of B Channel can not
be used.
Balanced terminal
→
p5
x
Input SACD/CD, Line 1, Line 2, Tape (Un-
balanced) terminal
The terminal to connect with output terminal of SACD, CD
Players.
In case of Bi-Amp mode, Input terminal of B Channel can not
be used.
c
Rec out terminal
The terminal to connect with input terminal of Recording equip-
ment such as CD recorder.
In case of Bi-Amp mode, the signal input to A channel will be
out to both of A/B channels.
v
Pre out Unbalanced 1,2 terminal
The terminal to connect with Unbalanced input terniminal of
Power Amp.
In case of Bi-Amp mode, the signal input to A channel will be
out to both of A/B channels.
b
Pre out Balanced terminal
The terminal to connect Balanced input terminal of Power
Amp.
In case of Bi-Amp mode, the signal input to A channel will be
out to both of A/B channels.
n
Remote control In/Out terminal
To connect several units of SC-7S1 by attached remote cable,
and connectedly operate them.
In terminal is for receiving control signal, Out terminal is for
sending control signal.
m
ID No. switch
Whilst several SC-7S1 are connected, to set up respective ID
No. to distinguish each products.
When only 1 unit is used, the No. will be set 1. Initial setting is
<1>.
Trim adjustment in case of several units of SC-7S1
→
p18
,
Mode switch
The switch to change Stereo mode and Bi-Amp mode. Initial
setting is <stereo>.
●
In case SC-7S1 is used by normal 2 channel.
Setting <Stereo> mode.
● In case of complete Bi-Amp connection by 2 units of SC-
7S1.
Setting <Bi-Amp> mode.
In case of <Bi-Amp> mode, the signal input from A chan-
nel will be out to both of A/B channels through Pre-out
terminal and Rec out terminal.
Then, input terminal on B channel can not be used.
.
AC IN socket
Connect to a household power outlet.