.
u i o
Q1
Q0
G
FLASHER IN jack
Used to connect a control box, etc. (
H
RS-232C connector
Used to connect home automation controller devices fitted with
RS-232C connectors. Consult the owner’s manual of the home
automation controller for more information about serial control of this
unit.
Perform the operation below beforehand.
A
Turn on the power of this unit.
B
Turn off the power of this unit from the external controller.
C
Check that the unit is in the standby mode.
I
REMOTE CONTROL connectors
Used to connect to a Marantz audio device that is compatible with the
J
EXTERNAL/INTERNAL switch
Turn this switch to “EXTERNAL” to operate the unit by pointing the
remote control at the amplifier connected to this unit using the remote
K
AC inlet (AC IN)
Used to connect the power cord. (
12