68
CS4398 (MAIN : U204)
CS4398 Terminal Functions
DSD_B
DSD_A
DSD_SCLK
VLS
SDIN
VQ
SCLK
AMUTEC
LRCK
AOUTA-
MCLK
AOUTA+
VD
VA
DGND
AGND
M3 (AD1/CDIN)
AOUTB+
M2 (SCL/CCLK)
AOUTB-
M1 (SDA/CDOUT)
BMUTEC
M0 (AD0/CS)
VREF
RST
REF_GND
VLC
FILT+
1
2
3
4
5
6
7
8
21
22
23
24
25
26
27
28
9
10
11
12
17
18
19
20
13
14
15
16
Pin Name
Pin #
Pin Description
DSD_A
DSD_B
28
1
Direct Stream Digital Input
(
Input
) - Input for Direct Stream Digital serial audio data.
DSD_SCLK
2
DSD Serial
Clock
(
Input
) - Serial clock for the Direct Stream Digital audio interface.
SDIN
3
Serial Audio Data Input
(
Input
) - Input for two’s complement serial audio data.
SCLK
4
Serial
Clock
(
Input
) - Serial clock for the serial audio interface.
LRCK
5
Left Right Clock
(
Input
) - Determines which channel, Left or Right, is currently active on
the serial audio data line.
MCLK
6
Master Clock
(
Input
) - Clock source for the delta-sigma modulator and digital filters.
VD
7
Digital Power
(
Input
)
-
Positive power for the digital section.
DGND
8
Digital Ground
(
Input
) - Ground reference for the digital section.
RST
13
Reset
(
Input
) - The device enters system reset when enabled.
VLC
14
Control Port Power
(
Input
)
-
Positive power for Control Port I/O.
FILT+
15
Positive Voltage Reference
(
Output
)
-
Positive reference voltage for the internal sam-
pling circuits.
REF_GND
16
Reference Ground
(
Input
) - Ground reference for the internal sampling circuits.
VREF
17
Voltage Reference
(
Input
) - Positive voltage reference for the internal sampling circuits.
BMUTEC
AMUTEC
18
25
Mute Control
(
Output
) - The Mute Control pin is active during power-up initialization, mut-
ing, power-down or if the master clock to left/right clock frequency ratio is incorrect. During
reset, these outputs are set to a high impedance.
AOUTB+
AOUTB-
20
19
Differential Right Channel Analog Output
(
Output
) - The full-scale differential analog
output level is specified in the Analog Characteristics specification table.
AGND
21
Analog Ground
(
Input
) - Ground reference for the analog section.
VA
22
Analog Power
(
Input
)
-
Positive power for the analog section.
AOUTA+
AOUTA-
23
24
Differential Left Channel Analog Output
(
Output
) - The full-scale differential analog out-
put level is specified in the Analog Characteristics specification table.
VQ
26
Quiescent Voltage
(
Output
) - Filter connection for internal quiescent voltage.
VLS
27
Serial Audio Interface Power
(
Input
)
-
Positive power for serial audio interface I/O.
Stand-Alone Mode Definitions
M3
M2
M1
M0
9
10
11
12
Mode Selection
(
Input
) - Determines the operational mode of the device.
Control Port Mode Definitions
AD1/CDIN
9
Address Bit 1 (I²C) / Control Data Input (SPI)
(
Input
) - AD1 is a chip address pin in I²C
mode; CDIN is the input data line for the Control Port interface in SPI mode.
SCL/CCLK
10
Serial Control Port Clock
(
Input
) - Serial clock for the serial Control Port.
SDA/CDOUT
11
Serial Control Data (I²C) / Control Data Output (SPI)
(
Input/Output
) - SDA is a data I/O
line in I²C mode. CDOUT is the output data line for the Control Port interface in SPI mode.
AD0/CS
12
Address Bit 0 (I²C) / Control Port Chip Select (SPI)
(
Input
) - AD0 is a chip address pin
in I²C mode; CS is the chip select signal for SPI format.
Содержание SA-KI-PEARL-LITE/N1B
