Working Angle and Range of the IR blaster
Warning The IR signals sent out by the RF Extender always have to be able to reach the
receiving eyes of your devices. Make sure that the IR blaster (dark plastic window
on top of the RF Extender) is aimed at your devices.
RX-77 07-25-2001 Page 2 of 6
Minimum distance:4 inches (10 cm)
Maximum distance: Approx. 16 feet (5m)
Before you install the RF Extender, you should decide which of the
set-up described on p. 1 apply to your needs.
It is also possible to place RF Extender with the IR blaster facing up. In this case,
the RF Extender can be placed at a distance and higher than the devices.
Make sure there are no objects between the RF Extender and the receiving eyes.
Mounting
The RF Extender can be mounted to a piece of furniture using the included
mounting plate and the 4 screws. Take into account the range and the working
angle of the IR blaster. Also make sure to place the RF Extender in a
central position
aimed directly at your devices.
Warning It is adviced not to place the RF Extender inside or near a
metal
closet as
RF signals can be disturbed by metal objects.
Installation
To get optimal results, it is recommended to place the RF Extender horizontally
with the IR blaster facing up or down.
from the bottom of the
1 Remove the mounting plate
2 Screw the plate where you
want to place the RF Extender.
Provide space to connect the
power adapter.
3 Slide the RF Extender on the
mounting plate.
Place the RF Extender mounted
up side down inside a closet.
Always maintain a minimum
distance of 4 inches (10 cm)
between the RF Extender and
your devices.
RF Extender.
User Guide
2
