Marantz PMD970, Руководство по обслуживанию

Страница: 11 / 44

9
2. Micro- Processor version check
The software version of the micro- processor is displayed on the TV or monitor.
The procedures are following.
1) Press POWER button.
2) Press SETUP button.
3) Select "TV Aspect" and 16:9 wide
4) Press “Numeric button” in the following turn.
5) Press SELECT/ENTER button. SELECT/ENTER
The connected TV indicates "SYSTEM INFORMATION"
Please check "MICOM VER".
Example indicated
SYSTEM INFORMATION
MODEL : MARANTZ
REGION NO :1
CHIP ID :MT1397 C
MAIN VER :D212
SUB VER :0000
SERVO VER :C175
MICOM VER :V0.67
PROM OPTION :XX XX XX XX XX XX
Factory Reset Done
SETUP
Turn off power to quit Service Mode.
3. Error message
During reading the upgrade disc, error messages are as follows
[Error Num] = 1 ~ 3
You can retry to upgrade by disc.
Because, fl ash ROM is not erased data yet.
[Error Num] = 4 ~
It is very worst case. The fl ash ROM is broken during erasing or programming.
You need to rewrite from hardware (PC) for using another jig.
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Menu Language
Progressive Scan
Digital Audio Output
5.1 Speaker Setup
Others
Disc Audio
4:3
4:3
16:9
Letterbox
Panscan
Wide