![Marantz PMD570 Скачать руководство пользователя страница 19](http://html.mh-extra.com/html/marantz/pmd570/pmd570_service-manual_1725901019.webp)
17
処理中は、
Factory
と表示されます。完了したら、通常表示となります。
Displayed as “Factory” during processing. And display returns after complete.
4.5. FACTORY モード
ソフトのバージョンアップをした際には、仕向け別に出荷設
定(EEPROM の初期化)を行ないます。
/N 仕向け
1.
MENU/STORE
ボタンと
(REW)
ボタンを押しながら
POWER
ボタンを押します。3 秒以上ボタンを押します。
2.
FACTORY
と表示がでます。自動的に出荷時の設定にな
ります。
/F と /U 仕向け
1.
MENU/STORE
ボタンと
(FWD)
ボタンを押しながら
POWER
ボタンを押します。3 秒以上ボタンを押します。
2.
FACTORY
と表示がでます。自動的に出荷時の設定にな
ります。
4.5. FACTORY MODE
After the completion of update of Main microprocessor (QU01),
to reset all setting to default status, follow the procedure below.
/N version
1. Press the
POWER
button while pressing
MENU/STORE
and
(REW) button. (
MENU/STORE
and
(REW) but-
ton are pushed 3 seconds or more.)
2. FACTORY name is displayed on LCD. The unit becomes
the setup of default automatically.
/F and /U version
1. Press the
POWER
button while pressing
MENU/STORE
and
(FWD)
button. (
MENU/STORE
and
(FWD)
but-
ton are pushed 3 seconds or more.)
2. FACTORY name is displayed on LCD. The unit becomes
the setup of default automatically.
4.6. The procedure of upload firmware two or more Units continuously
4.6. 書き込みを複数台連続で行なうときは ...
1.
Disconnect
をクリックして、未接続状態にします
2. 新しいセットに入れ替え、Windows PC とケーブルにて
接続します。
1. Click
Disconnect
.
2. Replace the unit with a new one and connect RS-232C
cable to the set.
TOTAL
Factory
TRACK TIME
REC REMAIN kbps
A-B
TRACK
MARK
kHz
AM
PM
L
-dB
R
INT
MIC
LINE
S.SKIP
-dB
40
20
12
6
2
0
OVER