SPECIAL MODE
Special mode setting button
b
No. 1 - 4, 6 - 8 : While holding down buttons "
A
", "
B
" and "
C
" simultaneously, press the power button to turn on the power.
b
No. 5, 9, 10 :
While the power is on, hold down buttons "
A
", "
B
", and "
C
" for at least 3 seconds .
No.
Mode
Button A Button B Button C
Descriptions
1 Version Display Mode
(MCU / DSP Error Display)
DIMMER
STATUS
-
Displays the version of firmware such as the MCU or DSP. Errors that have occurred are displayed.
(See
2 PANEL / REMOTE LOCK Selection
Mode
M-DAX
DIMMER
-
Activates the unit in PANEL/REMOTE LOCK selection mode to enable PANEL LOCK and Remote Lock On/Off to be set.
(See
2. PANEL / REMOTE LOCK Selection Mode
3 Selecting the Mode for Service-related
TUNER
PRESET CH +
STATUS
-
A selection mode for entering service-related modes.
Service-related modes : No. 3-1 - No. 3-4 (See
3-1. Selecting the Mode for Service-related
)
3-1 Check the Video/Audio path Mode
↑
↑
-
This is a special mode for service confirmation used during repair work to simplify the confirmation work for the Audio channel /
video channel.
(See
3-2 Protection history display mode
↑
↑
-
Displays the latest occurred protection history. (See
3-2. Protection History Display Mode
)
3-3 Operation Info Mode
↑
↑
-
Displays the accumulated operating time of the unit, the number of times the power was switched on, and the number of occur-
rences of each protection.
(See
3-4 TUNER STEP Mode
(U and N model only)
↑
↑
-
Enables the FM/AM tuner reception frequency step to be changed.
(See
3-4. TUNER STEP mode (U / N only)
)
4 Protection Pass Mode
DIMMER
STATUS
SOUND
MODE
Enables the power to be turned on when protection detection is disabled.
(See
5 Network Initialization Mode
TUNER
PRESET CH +
DIMMER
-
Network module backup data is initialized.
(See
5. Network Initialization Mode
)
6 User Initialization Mode
M-DAX
TUNER
PRESET CH +
-
Initialize the backup data for the MCU and network module. (Settings for the Installer are not initialized.)
7 Factory Initialization Mode
TUNER
PRESET CH +
INTERNET
RADIO
-
Initialize the backup data only for MCU.
(Settings for the Installer are initialized) (Network function settings are not initialized.) (See
)
8 Clearing of Operation Info
DIMMER
INTERNET
RADIO
-
Clear the accumulated operating time of the unit, the number of times the power was switched on, and the number of occurrences
6. Clearing the Operation Info
9 HDMI Diagnostics Mode
M-DAX
DIMMER
-
This mode is used to identify and solve the cause when there is a connectivity issue with this unit and an HDMI device.
For details on the operating methods and diagnosis procedures, see the HDMI Diagnostics and Troubleshooting guide issued on SDI.
10 Log Capture feature
DIMMER
SOUND
MODE
-
Acquires the Network Module log. As the Network Module reboots, the log is deleted. Make sure to obtain the log before turning off
)
NOTE :
If the volume indicator displays "
", the unit has entered the developer’s special mode. In this case, the RS-232C communication is not available.
To release this special mode, press and hold the "
M-DAX
" and "
PRESET CH +
" buttons for 3 seconds or more while the power is ON. When the volume indicator returns to the normal display, the RS-232C
communication is available.
All the indicator Lights
INTERNET
RADIO
SOUND
MODE
DIMMER
STATUS
M-DAX
X
TUNER
TUNER
PRESET -
Before Servicing
This Unit
Electrical
Mechanical
Repair Information
Updating
115