23
2.
After replacing Ethernet Unit Assy
When you replace this unit, you need software updates.
And MAC Address seal replacement is required.
- Preparation -
• RS-232 cable (Male to female, Straight).
• Burning
software:FlashWriter7_005_forM-CR603_RCD-N7_NA7004.exe
(1) Connect the RS-232C cable from PC.
(2) Turn on the unit. Display is lit, wait for the normal state. (More than 1 minute)
(3) Run "FlashWriter7_005_forM-CR603_RCD-N7_NA7004.exe".
(4) Click "RS-232C" and "COM1"of Communication.
(5) Click "Check communication"button. Clik "OK".
NG was the case, please try again to change the port.
(4) Select the RS232C
(5) Check the communication status
(6) Select File