4. CD test mode
4.1. Operations
Press and hold the power operation button "
X
" before inserting the power plug, then insert the power plug while hold-
ing down the button and wait for more than 3 seconds.
Select "
CD Test Mode
" using "
CURSOR
d
" and "
CURSOR
f
", then press the "
Enter
" button to select.
Startup display
"
CD Test Mode
" is displayed for 5 seconds.
CD TEST MODE indicator (when disc is loaded)
Remove the power plug to exit this mode.
4.2. Before starting the test
Open the tray and set the disc.
Even when a disc is already set, open and close the tray before the test.
4.3. Servo check
Press "
1
/
3
" button. Execute the following steps.
z
Press and hold the "
1
/
3
" button continuously for over 1 second to skip to SUB CODE readout in step
t
. "
INPUT
" but-
ton to return to "
0 CD TEST MODE
".
"
1
/
3
"
q
LD ON
"
1
/
3
"
w
FOCUS ON
"
1
/
3
"
e
CLV ON
"
1
/
3
"
25