1. Version Display Mode
1.1. Actions
Version information is displayed when the device is started in this mode.
1.2. Starting up
While holding down buttons the "
9
" and "
2
" buttons simultaneously, insert the AC plug to turn the
power on.
then press the "
8
" or "
9
" button to display the information in section
1.3.
on the display.
1.3. Display Order
Version of System μ -com → Version of USB μ -com → Serial number ·····
Turn the power back on to cancel this mode.
Main μ -com :
" _V e r_# # # # # # # # v * * "
########:Main μ -com version Display
**:region
Serial Number :
" _ M Z_ y w w x x x x x x _ _ _ "
y : The year (last digit)
ww : Week number
xxxxxx : Serial number
13051501
Ver
NUMBER
SERIAL
MZ_ywwxxxxxx
2. Display check mode
While holding down buttons the "
5
" and "
2
" buttons simultaneously, insert the AC plug to turn the
power on.
This mode is cancelled when the power is turned off.
All segments on the FL display flash in a 2 second cycle (1 second on, 1 second off).
3. Initialization (cold start)
While holding down buttons the "
5
" and "
3
" buttons simultaneously, insert the AC plug to turn the
power on.
Returns to normal operation after "
INITIALIZE
" is displayed.
Initialized settings
DIMMER :
100%
H/P AMP GAIN :
LOW
Digital Out :
On
Timer Play :
Off
Resume Play :
On
Quick Replay :
10 seconds
Auto Standby :
On (N), Off (F, U, K)
z
"
Laser on time
" is not deleted.
z
"
Initial value of laser current
" is not deleted.
37
Caution in
servicing
Electrical
Mechanical
Repair Information
Updating
