1-11
8-4 AS Adjustment
CAUTION :
Do not see the laser pick-up! Cover the laser pick-up unit
while AS adjustment.
Adjustment point : VR120, VR121
Test point : TP107(+), TP120 (+) TP105 (GND)
Equipment : Digital Multi Meter (DC voltage)
1. Press the mains switch (
POWER
BUTTON) while depressing
the
PLAY
button and
STOP
button.
2. Status will be on the
TEST mode 2
and FL display shows
<
TEST 2
>. After a couple of seconds FL display shows
<
TEST2 OK
>.
3. Press the
button. Then the FL display shows <
E3 02
>
and the status will be in
AS adjustment mode
.
4. Measure the DC voltage at the test point
TP107
.
5. Press the
button again. Then the DVD laser will light ON
and the FL display shows <
E3 00
>.
6. Press the
button again. Then the CD laser will light ON
and the FL display shows <
E3 01
>.
7. Adjust the voltage at the test point
TP120
by
VR121
, that the
value must be same as
TP107
(10mV) value measured on
#4. process.
8. Press the
button twice of time. Then the DVD laser will
light ON and the FL display shows <
E3 00
>.
9. Measure the DC voltage at the status
DVD laser light ON
.
Adjust the voltage at that status 35mV (±10mV) lower than
“CD laser light ON “ status by the trim resister VR120.
10.Press the
button again. Confirm the DC voltage at the
status
CD laser light ON
.
(DC voltage must be 35mV higher than the status
DVD
laser light ON
.)
11.Power OFF the mains switch (
POWER
BUTTON).
Содержание DV7000
