12
BASIC
CONNECTIONS
BASIC
OPERA
TIONS
ADV
ANCED
CONNECTIONS
ADV
ANCED
OPERA
TIONS
TROUBLESHOOTING
NAMES AND
FUNCTIONS
OTHERS
ADV
ANCED
OPERA
TIONS
ENGLISH
REMOTE CONTROL UNIT SETTING
RECALL
1 - 5
• To set CODE2
Press
RECALL
button and Numerical button
2
on
the remote controller at a time for fi ve seconds or
more.
• To set CODE3
Press
RECALL
button and Numerical button
3
on
the remote controller at a time for fi ve seconds or
more.
• To set CODE4
Press
RECALL
button and Numerical button
4
on
the remote controller at a time for fi ve seconds or
more.
• To set CODE5
Press
RECALL
button and Numerical button
5
on
the remote controller at a time for fi ve seconds or
more.
Caution
To reset the remote control to CODE1, press
RECALL
button and Numerical button 1 on the
remote controller at the same time for
fi
ve seconds
or more.
CC4003 SETTING
RECALL
PROGRAM
• To synchronize the remote control code of
a CC4003 with the corresponding remote
controller, simultaneously press the
PROGRAM
and
RECALL
buttons on the remote controller.
• The remote control code set is displayed on the
display window on the unit for fi ve seconds, and
the setting is completed.
DISPLAY EXAMPLES
• When the remote controller is set to
CODE1
• When the remote controller is set to
CODE2
• When the remote controller is set to
CODE3
• When the remote controller is set to
CODE4
• When the remote controller is set to
CODE5
ADVANCED OPERATIONS
REMOTE CONTROL CODE SETTING
• The unit and remote controller have fi ve sets
of built-in remote control codes for each. These
codes enable up to fi ve CC4003s installed in the
same place to be controlled independently.
• To use multiple units at the same time, set the
second, third, forth, and fi fth CC4003s and their
remote controller’ remote control codes.
• To set the codes, follow the procedure below to
control only selected unit is remotely controlled.
• At the factory, the unit and remote controller
were set to CODE1.
CC4003̲U̲01̲Eng.indd 12
CC4003̲U̲01̲Eng.indd 12
09.8.24 4:08:52 PM
09.8.24 4:08:52 PM
