Press ENTER button again and use the “PM2” or “PM3” encoders to select between “be shown”
or “not be shown” options.
Choosing the “be shown” option means that once the unit is locked, you cannot access
parameter editing features, but they will be displayed on the LCD screen.
Choosing the “not be shown” option means that once the unit is locked, the parameters will
not be shown at all. With this option, when trying to access a parameter, the following
screen message will appear:
−
Lock Unit: this sub-menu allows the user to lock the device so no parameters can be edited
or modified.
When the Unit is in an unlocked condition, all parameters will be available for editing. When
you select On, all parameters will be locked and are not available for editing.
When you select lock from the menu, the unit will be locked and the lock menu automatically
exited. The screen will revert to the “Default” showing the current XOVER configuration and
the preset selected and beside the preset’s name a “keylock” icon indicating that the DPA480P
is locked.
−
Change Password: from the “Change Password” sub-menu:
Press “ENTER” to access the “Change Password” page:
Use the PM2 encoder to move between available locations, and the PM3 encoder to choose a
character. The current position of the cursor for the characters to be entered is shown by a
“blinking underscore”.
Change Password
[_ ]
Parameter will
not be shown
SECURITY UTILITY
-- Lock Unit --
Lock Unit
Lock = On
SECURITY UTILITY
-- Change Password --
Change Password
[ ]
Содержание DPA480P
Страница 1: ...User Manual DPA480P...
