Marpo Kinetics, Inc.
258 LINDBERGH AVE, Livermore, CA 94551
•
(
925) 606-6919
• www.marpokinetics.com
9. Connect PLASTIC COVERS for Boom Base. Using provided hardware, fasten small
covers to the main covers, then fasten the top of the small cover to the boom.
The electronic display works with two AAA batteries. To replace the batteries, remove
the 4 screws that connect the DISPLAY TRAY to the main covers. Slowly pull the
DISPLAY TRAY away from the machine. Disconnect the display from the main
harness. To access the battery cover on the back of the DISPLAY remove the 4 machine
screws that connect the DISPLAY to the the DISPLAY TRAY.
4
Boom
Cap
Carriage
Handle
Boom
connection
Plastic Covers for
Boom Base
