Maplin A79TY, Руководство пользователя, Страница: 11 / 18

9
2. Starting up/ Standby/ Sleeping/ Power off
A. Starting up
a. Press the “ON/OFF” switch on the side of the robot to “ON”.
b. Press” ” on main body or ON/OFF on remote control to start cleaning.
Note: If robot is in sleeping mode, press on main body or ON/OFF on remote
control to wake up the robot from sleeping mode, then press again, the robot
will start cleaning automatically.
B. Standby
Standby means the robot’s main power switch is “ON”, and the robot is ready to use.
It can be changed to standby mode by below methods:
a. During robot cleaning, press on main body to enter standby mode.
b. During robot cleaning, press ON/OFF button on remote control to power off the
robot.
C. Sleeping
In sleeping mode, the robot can only be woken up from button on main body or
ON/OFF on remote control in order to save power. To turn robot in to sleeping mode
from standby mode:
a.
Keep pressing on main body for 3 seconds.
b. Robot will automatically enter sleeping mode if there is no command received for
more than 60 seconds.
D. Power off
a. Press the “ON/OFF” switch on the side of the robot to “OFF”.
3. Scheduling
Use the scheduling mode to have the robot automatically clean at a certain time every
day.
Scheduling by keys on the main body
Note: The robot can only be set when it’s in Standby or Charging mode. If the robot is in
sleep mode, press on main body or ON/OFF button on remote control to wake up
the robot. If the robot is in Cleaning mode, stop it before scheduling.
Set schedule using LED panel on robot
A.
Setting Robot Clock
a.
In standby or charging status, press to start the clock-setting. The LED
panel will show the current system time.
b. Press to enter the hour-setting mode, the left two numbers on LED panel
will flash. Press to increase hour or to decrease it.
c. Press again to enter the minute-setting mode, the right two numbers on
LED panel will flash. Press to increase it or to decrease it.
d. Press again to confirm the setting.