Maplin A75TB, Руководство пользователя

Страница: 4 / 12

Product Installation and Usage
Installation method
The product can be used directly after unpacking without installation.
Usage of keys
1. When initially turned on, the LED lights will illuminate for 2 seconds and produce a bi signal to show it
has been correctly inserted. The machine will then enter standby mode and all buttons will be invalid
except the “ON/OFF” button.
2. a) Press the “ON/OFF” button during standby mode and the machine will power on, produce a bi
signal and begin working with the same settings before previously powering down.
b) When pressed while operating, the machine will turn off and enter standby mode with a long bi
signal. When turned off using the hot wind status, the fan will turn off 10 seconds later. Press this
button under working conditions and the machine will turn off and enter standby mode with a bi
signal.
3. Press the “SPEED” button when using the cool wind status to set the wind speed. The machine will
produce a bi signal and the related indicator lights will illuminate for low, medium and high speeds.
There is only a medium wind speed option for hot wind.
4. Press the “TIMER” button to set when the product will power off. The time will be set as 1H, 2H, 4H
and 8H when pressing the button. After the time has been set and countdown begins, the machine
will turn off after the time limit.
5. a) Press “OSCILLATION (swing horizontally)” button and the synchronous motor will be controlled
by SCR for fan blade on and off switching.
b) Press “OSCILLATION (swing horizontally)”and “OSCILLATION (swing levelly)” button at the same
time for 3 seconds and the button-pressing voice will be cancelled; press again for 3 seconds and
the button-pressing voice will be recovered.
6. Press “OSCILLATION (swing levelly) for horizontal fan blade on and off switching. When the machine
is on, the horizontal fan blade will be in 127 degrees acquiescently; when the “OSCILLATION (swing
horizontally)” button is pressed, the fan blade will swing freely from 60 to 127 degrees and stay in
any angle, then swing from 60 to 127 degrees again. When the machine is turned off, the fan blade
should always be at 0 degrees.
7. a) Press the “COOLING” button to turn on and off the humidification/refrigeration function (pump).
b) Press the “COOLING” button for 3 seconds and the washing indicator light will turn off with a
short bi.
8 Press “HEATING” switching button:
a) Press this button to switch between the cool/hot modes. If in cool wind mode, press the button
once and the heater will move to the air outlet, and begin heat mode at medium speed and the
temperature will be set at 22°C Press twice and the temperature will be set at 29°C. Press three
times and the temperature will be set at 36°C. Press four times for heat to stop. The heater will