
(A) (B) (C)
(A) Put the rear grill on the front motor cover and tighten by 4pcs of screws (1).The
hanging hook (6) should be upward.
(B) Put blade on the groove of shaft (2), and tighten the screw (3).
(C) Mount Front Safety Grill onto Rear Grill by
hanging the hook (7) of front guard
over the top of the Rear Grill. Close the 4pcs of clasps (5) all around the grill, also
tightening screw (4)
Operating Instructions:
a) Ensure voltage used corresponds with the voltage indicated.
b) Turn the speed control to selected speeds: 0 (off) and speeds 1, 2, 3 - Slow,
Medium, Fast.
c) Tilting angles-By pushing the tilt-guard; you can adjust the fan to preferred angle.
d) Never touch the blades with hand or any object!
e) Do not pull the cord too hard. If damaged after pro-longed use, ask an electrician
to repair.
f) To clean: Disconnect the power cord from the mains. Remove the guard and the
blades carefully. Do notdrop the blades! First use soft cloth with light soap to
clean off oil stains. Then wipe and polish with drycloth. Never use polish or any
corrosive liquid that will damage the paint, metal or plastic! Re-attach theblades
and lock the guard securely before use.