OMI Operations Manual: OMI6900 Series
4
OMI Operations Manual: OMI6900 Series
4
SAFETY PRECAUTIONS
Please observe the following precautions when installing the OMI6900 Series Open HMIs. Failure to
comply with these restrictions could result in loss of life, serious personal injury, or equipment damage.
Warning:
Disconnect this equipment from any power before cleaning. Do
not use liquid or spray detergents for cleaning. Use a damp cloth.
Warning:
Keep this equipment away from humidity.
Warning:
Before applying power the unit and make sure the voltage of the
power source is within the input voltage rating of the unit.
Warning:
Position the power cord so that people cannot step on it. Do not
place anything over the power cord.
Warning:
Never open the equipment and do not operate equipment with its
back cover removed- there are dangerous high voltages present inside. For
safety reasons, the equipment should be opened only by a qualified service
technician.
Warning:
This equipment generates uses and can radiate radio frequency
energy and if not installed and used in accordance with the instruction
manual, it may cause interference to radio communications. It has been
tested and found to comply with the limits for a Class A computing device
pursuant to FCC Rules, which are designed to provide reasonable
protection against such interference when operated in a commercial
environment. Operation of this equipment in a residential area is likely to
cause interference in which case the user at his own expense will be
required to take whatever measures may be required to correct the
interference.
Warning:
If any of the following situations arise, get the equipment checked
by qualified service personnel.
•
The power cord or plug is damaged.
•
Liquid has penetrated into the equipment.
•
The equipment has been exposed to moisture.
•
The equipment does not work well, or you cannot get it to work according to this
operations manual.
•
The equipment has been dropped and damaged.
•
The equipment has obvious signs of breakage.
Warning:
Do not leave this equipment in an uncontrolled environment
where the storage temperature is below -20°C (-4°F) or above 60°C (140°F).
It may damage the equipment.
