Maple Systems HMI5056T, Руководство по установке, Страница: 2 / 16

2 Sil ver Plus Se ries
1010-1006, Rev 01
In tro duc tion
Thank you for purchasing a Maple Systems Silver Plus Series OIT. You have selected a
rugged, reliable, and powerful operator interface for your application. This booklet
describes the steps necessary to ensure easy installation of your Silver Plus Series OIT.
Please read this booklet carefully.
Static Aware ness
It is best NOT to remove the rear cover on the OIT. When the rear cover is removed the
circuitry inside is exposed to possible damage by electrostatic discharge during handling.
Minimize the possibility of electrostatic discharge by:
•
Discharging personal static by grounding yourself prior to handling the OIT.
•
Handling the OIT at static-free, grounded work station.
•
Connecting the chassis of the OIT to a clean ground.
•
Placing the OIT into an anti-static bag during transport.
Un pack ing the Unit
Carefully unpack the OIT. Please read any instructions or cautions that appear on the
shipping container. Check all material in the container against the enclosed packing list.
Maple Systems, Inc., will not accept responsibility for shortages against the packing list
unless notified within 30 days. The equipment and its accessories were inspected and tested
by Maple Systems before shipment; all of the equipment should be in good working order.
Examine the equipment carefully; if any shipping damage is evident, notify the carrier
immediately. You are responsible for claim negotiations with the carrier. Save the shipping
container and packing material in case the equipment needs to be stored, returned to Maple
Systems, or transported for any reason.
War ranty
Maple Systems warrants each product to be free from electrical and mechanical defects in
materials and workmanship for a period of two years from the date of shipment. This
warranty does not apply to defects in the Products caused by abuse, misuse, accident,
casualty, alteration, negligence, repair not authorized by Maple Systems, use on current or
voltages other than specified by Maple Systems, or application or installation not in
accordance with published instruction manuals. This warranty is in lieu of any other
warranty either expressed or implied.
Maple Systems’ liability is limited to the repair or replacement of the Product only, and not
costs of installation, removal, or damage to user’s property or other liabilities. If Maple
Systems is unable to repair or replace a nonconforming Product, it may offer a refund of the
amount paid to Maple Systems for such Product in full satisfaction of its warranty
obligation. Maximum liability of Maple Systems is the cost of the Product.
Information furnished by Maple Systems, Inc., is believed to be accurate and reliable.
However, no responsibility is assumed by Maple Systems for the use of this information nor
for any infringements of patents or other rights of third parties which may result from its use.
No license is granted by implication, or otherwise, under any patent or patent rights of Maple
Systems, Inc. Maple Systems retains the right to revise or change its products and
documentation at any time without notice.